ED Tank Mixing Eductor Nozzle

LORRIC ED eductor stirring spray nozzle create effective agitation and circulation, ensuring thorough mixing of chemicals, directing suspended solids towards filters, and preventing sedimentation. No tools required for installation.

Brand: LORRIC
Fluid: Single fluid
Materials: Fiberglass-reinforced PP (FRPP)
  SS316 (Stainless Steel) (3/8" only)
Thread Standard: BSPT
Thread Size: 3/8", 3/4"

Catalogue



The Principle

The Principle

Used for liquid stirring under the liquid surface. Specially designed nozzle that creates a stirring and circulating effect. This nozzle can mix chemicals, direct the suspended substances to a filter and prevent precipitation.
Energy-efficiency of liquid stirring: the eductor nozzles are designed to suck and spray liquid through the amplified nozzle tube to increase liquid flow rate up to 4 times which provides more efficient stirring than aeration or robot arms (Quantity supplied+Intake=Total Flow)

Single piece structure

Single piece structure and hand installable without any tools.

Single piece structure
Material Options

Material Options

Multiple Flow Rates Available

The fan spray nozzle offers a variety of flow rates. For example, at a standard design pressure of 0.5 Kg/cm², the minimum total flow rate is 62.51 Lpm, and the maximum total flow rate is 218.74 Lpm. (For other flow rate requirements, please refer to the specification sheet or contact us directly.)

Multiple Flow Rates Available
About engineering tolerance

About engineering tolerance

Angle tolerance is within a range of plus or minus 10% of the standard angle.

Material Guarantees

Metal
Metal

We take high quality smithing metal to produce solid and durable nozzles by detail turning.

Plastic
Plastic

We promise never to use recycled materials.

High Quality
High Quality

All material is purchased from world top providers.

Please place your order according below information.

  • Please choose the nozzle that best suits your requirements based on the selection guidelines provided below. 
    • For a 3/8" base with internal thread, choose a matching 3/8" external threaded nozzle, and ensure base thread is NPT or BSPT.
    • Choose the H or NH series for a one-piece fan nozzle that fits your needs.
    • To find the nozzle flow rate that matches your requirements, specifically the spray flow rate for each nozzle based on your needs, please consult the "Flow Rate and Angle Comparison Chart" below.
    • To determine the nozzle angle that meets your requirements, which corresponds to the spray coverage area of each nozzle based on your needs, please consult the "Flow Rate and Angle Comparison Chart" below.
    • Choose the right nozzle material to match your needs, as different environments demand specific materials. Select accordingly based on your usage context.
  • Example specification: 3/8” BSPT ED 152 FRPP. Each number corresponds to the following options and meanings.
 

Select
Unit
  • *
  • *
  • *
  • *
Thread Size Capacity Code Magnification Definition of flow Capacity at Pressure Capacity at Pressure
0.1
kgf/cm²
0.25
kgf/cm²
0.5
kgf/cm²
0.75
kgf/cm²
1
kgf/cm²
1.5
kgf/cm²
2
kgf/cm²
3
kgf/cm²
4
kgf/cm²
3/8" 063 5.0 Quantity supplied
5.59 8.84 12.50 15.31 17.68 21.65 25.00 30.62 35.36
    5.0 Intake
22.36 35.36 50.01 61.25 70.72 86.61 100.01 122.49 141.44
    5.0 Total Flow 27.95 44.20 62.51 76.56 88.40 108.27 125.02 153.11 176.80
3/8" 152 5.0 Quantity supplied
10.87 17.18 24.30 29.76 34.36 42.08 48.59 59.51 68.72
    5.0 Intake
43.46 68.72 97.18 119.03 137.44 168.33 194.37 238.05 274.88
    5.0 Total Flow 54.33 85.90 121.48 148.78 171.80 210.41 242.96 297.97 343.60
3/4" 5.0 Quantity supplied
19.57 30.94 43.75 53.58 61.87 75.77 87.50 107.16 123.74
  5.0 Intake
78.26 123.74 174.99 214.32 247.48 303.10 349.99 428.65 494.96
  5.0 Total Flow 97.83 154.68 218.74 267.90 309.35 378.87 437.49 535.81 618.70
Thread Size Capacity Code Magnification Definition of flow Capacity at Pressure Capacity at Pressure
0.01
MPa
0.025
MPa
0.05
MPa
0.075
MPa
0.1
MPa
0.15
MPa
0.2
MPa
0.3
MPa
0.4
MPa
3/8" 063 5.0 Quantity supplied
5.65 8.93 12.62 15.46 17.85 21.87 25.25 30.92 35.71
    5.0 Intake
22.58 35.71 50.50 61.85 71.41 87.46 100.99 123.69 142.83
    5.0 Total Flow 28.23 44.63 63.12 77.31 89.27 109.33 126.24 154.62 178.53
3/8" 152 5.0 Quantity supplied
10.97 17.35 24.53 30.05 34.70 42.50 49.07 60.10 69.39
    5.0 Intake
43.89 69.39 98.14 120.19 138.79 169.98 196.28 240.39 277.58
    5.0 Total Flow 54.86 86.74 122.67 150.24 173.49 212.48 245.35 300.49 346.97
3/4" 5.0 Quantity supplied
19.76 31.24 44.18 54.11 62.48 76.52 88.36 108.21 124.95
  5.0 Intake
79.03 124.95 176.71 216.43 249.91 306.07 353.42 432.85 499.82
  5.0 Total Flow 98.78 156.19 220.89 270.53 312.38 382.59 441.78 541.07 624.77
Thread Size Capacity Code Magnification Definition of flow Capacity at Pressure Capacity at Pressure
0.1
bar
0.25
bar
0.5
bar
0.75
bar
1
bar
1.5
bar
2
bar
3
bar
4
bar
3/8" 063 5.0 Quantity supplied
5.65 8.93 12.62 15.46 17.85 21.87 25.25 30.92 35.71
    5.0 Intake
22.58 35.71 50.50 61.85 71.41 87.46 100.99 123.69 142.83
    5.0 Total Flow 28.23 44.63 63.12 77.31 89.27 109.33 126.24 154.62 178.53
3/8" 152 5.0 Quantity supplied
10.97 17.35 24.53 30.05 34.70 42.50 49.07 60.10 69.39
    5.0 Intake
43.89 69.39 98.14 120.19 138.79 169.98 196.28 240.39 277.58
    5.0 Total Flow 54.86 86.74 122.67 150.24 173.49 212.48 245.35 300.49 346.97
3/4" 5.0 Quantity supplied
19.76 31.24 44.18 54.11 62.48 76.52 88.36 108.21 124.95
  5.0 Intake
79.03 124.95 176.71 216.43 249.91 306.07 353.42 432.85 499.82
  5.0 Total Flow 98.78 156.19 220.89 270.53 312.38 382.59 441.78 541.07 624.77
Thread Size Capacity Code Magnification Definition of flow Capacity at Pressure Capacity at Pressure
1.5
psi
3.5
psi
7
psi
10
psi
15
psi
20
psi
28
psi
40
psi
60
psi
3/8" 063 5.0 Quantity supplied
1.52 2.32 3.28 3.92 4.80 5.54 6.55 7.83 9.59
    5.0 Intake
6.07 9.27 13.11 15.66 19.19 22.15 26.21 31.33 38.37
    5.0 Total Flow 7.58 11.58 16.38 19.58 23.98 27.69 32.77 39.16 47.96
3/8" 152 5.0 Quantity supplied
2.95 4.50 6.37 7.61 9.32 10.76 12.74 15.22 18.64
    5.0 Intake
11.79 18.01 25.47 30.44 37.29 43.05 50.94 60.89 74.75
    5.0 Total Flow 14.74 22.51 31.84 38.05 46.61 53.82 63.68 76.11 93.21
3/4" 5.0 Quantity supplied
5.31 8.11 11.47 13.70 16.78 19.38 22.93 27.41 33.57
  5.0 Intake
21.23 32.43 45.86 54.82 67.14 77.52 91.73 109.64 134.28
  5.0 Total Flow 26.54 40.54 57.33 68.52 83.92 96.91 114.66 137.05 167.85
  • * Standard Pressure: Column in red.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.

Applications

Electroplating

Electroplating

Flow meter controls the flow of chemical liquids, ensuring a uniform coating for quality assurance; the nozzle ensuring even coating and consistent quality during electroplating

Auto Car Paint

Auto Car Paint

Flow meters ensure precise paint-solvent ratios for quality and eco-friendliness, while nozzles guarantee paint quality and environmental compliance by controlling the mixture

  • Cleaning: Gas scrubbers, waste gas treatment, etc.
  • Cooling: Cooling water towers, etc.
  • Dispersion: Firefighting, Tank mixing, electrostatic coating, ion exchange equipment, cooling water towers, C.I.P tanks, phosphate barrel tanks, slurry barrel tanks, paint barrel tank agitation.
     

Size

Material Thread(BSPT) Size(mm) Weight(g)
A B SS316 FRPP
Metal 3/8"Male 54 116 274 -
Plastic 3/4"Male 74 159 - 84.6
3/8"Male  54 116
- 34

Installation

Easy installing with 2 simple steps !

Step 1
Step 1

Drill correspon-ding female threads on your pipe.

Step 2
Step 2

For better leakproof-ness, please use Teflon seal tape on nozzle thread. Aim the thread of nozzle at the female thread. Tighten the nozzle clockwise.

Finished
Finished

Finished

Unable to find the nozzle you need?

Unable to find the nozzle you need?

With over 30 years of nozzle development and manufacturing experience, along with extensive customer site knowledge, allow us to assist in creating the ideal product for your needs!

Tailored nozzles to match your requirements.

LORRIC can customize "flow rate," "angle," and "flow distribution" to suit your specific usage scenarios. We also offer support for unique situations like special impact force or ultra-fine spray needs. Feel free to reach out to LORRIC's team for more information and assistance.

Customizable Capacity
Customizable Capacity

Under fixed pressure, the volume of liquid or gas sprayed by nozzles within a certain period of time.

Customizable Spray Angle
Customizable Spray Angle

It is the angle by orifice and the loop of gas or liquid sprayed out.

Customizable Distribution
Customizable Distribution

The distribution of particle on surface by sprayed up liquid.

CFD improves our work outcomes

CFD improves our work outcomes

Testing in extreme environments demands data to aid nozzle development.

Working Process and matters need attention of Nozzle Customization

  • We provide custom nozzle services according to standard operating procedures.
  • Please note
    • There are minimum quantity requirements
    • There are exclusive sales channels must be mutually agreed upon
Working Process and matters need attention of Nozzle Customization
Products you may also like
Related articles