QT Coating Full Cone Spray Nozzle

Features
  • Full cone spray.
  • The two-piece combination design is divided into a nozzle and a body. The nozzle part can be fixed to the body without fixing the nut. The body has a special pipe clamp design. It is only necessary to drill a hole in the water outlet pipe, and then lock it with iron screw. The nozzle is fixed on the pipe. This nozzle is commonly used in the pre-painting and continuous casting machine cooling process.
  • size:

      ● Drilling hole size for pipe clamp: Ø 20 (19.0~20m/m)

      ● Fits pipe size: 1-1/4"(OD42 +/-0.3mm), 1-1/2"(OD48 +/-0.4mm)

  • Recommended working pressure: 2.0 kgf/cm²
  • Flowrate tolerance: ± 10% @ 2.0 ± 0.1 kgf/cm²
  • Angle tolerance: ± 10° @ 2.0 ± 0.1 kgf/cm² 
  • Applications:

      ● Cleaning: Dust, cleaning device etc.

      ● Dispersion: Humidifying, Chemicals, firefighting, and dust suppression.

LORRIC nozzle

 

 
Spray pattern & Flow distribution
LORRIC nozzle       
LORRIC nozzle
Specs

Please place your order according below information.


How to pleace an order for LORRIC nozzles?

  • • You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above.
  • • Please refer to following order example for placing order to LORRIC.
  •   Example :LORRIC nozzle

Select
Unit
  • *
  • *
  • *
  • *
Spray Angle Capacity Code Clamp Size Capacity at Pressure Capacity at Pressure
1-1/4" 1-1/2" 0.5
kgf/cm²
1.0
kgf/cm²
1.5
kgf/cm²
2.0
kgf/cm²
2.5
kgf/cm²
3.0
kgf/cm²
3.5
kgf/cm²
4.0
kgf/cm²
5.0
kgf/cm²
60° 82 v
v
15.0 21.2 26.0 30.0 33.5 36.7 39.7 42.4 47.4
Spray Angle Capacity Code Clamp Size Capacity at Pressure Capacity at Pressure
1-1/4" 1-1/2" 0.05
MPa
0.1
MPa
0.15
MPa
0.2
MPa
0.25
MPa
0.3
MPa
0.35
MPa
0.4
MPa
0.5
MPa
60° 82 v v 15.1 21.4 26.2 30.3 33.9 37.1 40.1 42.8 47.9
Spray Angle Capacity Code Clamp Size Capacity at Pressure Capacity at Pressure
1-1/4" 1-1/2" 0.5
bar
1
bar
1.5
bar
2
bar
2.5
bar
3
 bar 
3.5
 bar 
4
bar
5
bar
60° 82 v v 15.1 21.4 26.2 30.3 33.9 37.1 40.1 42.8 47.9
Spray Angle Capacity Code Clamp Size Capacity at Pressure Capacity at Pressure
1-1/4" 1-1/2" 10
psi
15
psi 
20
psi 
30
psi
40
psi
60
psi
70
psi
80
psi
90
psi
60° 82 v v 4.7 5.75 6.65 8.14 9.40 11.5 12.4 13.3 14.1
  • * Standard Pressure: Column in red.
  • * This product for spray angle 90° and 120° is able to be made to order.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.
Material
LORRIC nozzle

 

 
 
 
Material Guarantees
Metal
We take high quality smithing metal to produce solid and durable nozzles by detail turning.
Plastic
We promise never using recycled materials
High Quality
All material is purchased from world top providers.

 

Product Size
Pipe Size
(BSPT)
Size (mm) Weight (g)
  A     B     C     D  
1-1/4"
42.35 49.5 31 85.3 105.4
1-1/2"
42.35 49.5 31 85.3 100.5

LORRIC nozzle

Installation
Easy installing with 5 simple steps !
Step 1.

Aim the installation hole of the clamp at the pipe installation hole.

Step 2.

Fasten with the pipe clamp.

Step 3.

Tighten the screw by hand, and tighten again by electric screwdriver.

LORRIC nozzle
LORRIC nozzle
LORRIC nozzle
Step 4.

Put the nozzle and the union nut on the pipe clamp.

Step 5.

Adjust the direction of the nozzle and tighten the union nut.

Finished
Finished.
LORRIC nozzle
LORRIC nozzle
LORRIC nozzle
 

 


 

+886-978-005-235
[email protected]