PT Hollow Cone Spray Nozzle

Plastic, Hollow cone, Emissions treatment, Cooling
Apply for 
Emissions Treatment
NOx Control
Cooling

Features  
  • Hollow cone spray: Uniform distribution and spray density.
  • Good at air washing with small particle size.
  • Clog-resistant performance with right-angle design
  • It can be used at low pressure.
  • The spray particle size is smaller than the same model full cone nozzle. 
  • Two pieces nozzle design allows quick and easy to maintain.
LORRIC nozzle

 

 
Spray pattern & Flow distribution
LORRIC nozzle       
LORRIC nozzle
Specs

Please place your order according below information.


How to pleace an order for LORRIC nozzles?

  • • You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above.
  • • Please refer to following order example for placing order to LORRIC.
  •   Example :LORRIC nozzle

Select
Unit
  • *
  • *
  • *
  • *
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.05
kgf/cm²
0.1
kgf/cm²
0.2
kgf/cm²
0.2
kgf/cm²
0.3
kgf/cm²
0.5
kgf/cm²
0.6
kgf/cm²
0.7
kgf/cm²
1
kgf/cm²
100 82 57.98 82 115.97 142.03 164 183.36 200.86 216.95 259.31
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.005
MPa
0.01
MPa
0.02
MPa
0.03
MPa
0.04
MPa
0.05
MPa
0.06
MPa
0.07
MPa
0.1
MPa
100 82 58.55 82.80 117.10 143.42 165.61 185.16 202.83 219.08 261.85
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.05
bar
0.1
bar
0.2
 bar 
0.3
 bar 
0.4
 bar 
0.5
 bar 
0.6
 bar 
0.7
 bar 
1
 bar 
100 82 58.55 82.80 117.10 143.42 165.61 185.16 202.83 219.08 261.85
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.7
psi
1
psi 
1.5
psi
3
psi
5
psi
7
psi
10
psi
15
psi
20
psi
100 82 15.20 18.16 22.25 31.46 40.61 48.06 57.44 70.35 81.23
  • * Standard Pressure: Column in red.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.
Material

 

 
 
 
Material Guarantees
Metal
We take high quality smithing metal to produce solid and durable nozzles by detail turning.
Plastic
We promise never using recycled materials
High Quality
All material is purchased from world top providers.

 

Product Size
Thread
(BSPT)
Size (mm)
  A     B     C     D  
1-1/2"Male
89 147 117 118

LORRIC nozzle

Installation
Easy installing with 2 simple steps !
Step 1

Drill corresponding female threads on your pipe.

Step 2

For better leakproofness, please use Teflon seal tape on nozzle thread.

Aim the thread of nozzle at the female thread. Tighten the nozzle clockwise.

Finished

Finished.

LORRIC nozzle
LORRIC nozzle
LORRIC nozzle
 

 


 

+886-978-005-235
[email protected]