KD/KDMF Plastic two-piece full cone spray nozzle

Full cone spray, Uniform impact, Easy installed, Spraying uniformity
Apply for 
PCB Wet Processing

General Features
  • Full cone spray.
  • KDMF adopts a holeless multi-slotted core, possessing a more uniform impact than other standard solid cone nozzles of the same type. It is often used in semiconductor and printed circuit board etching and developing processes where spraying uniformity is extremely demanding.
  • KD adopts an X-shaped core, increasing the passage diameter of foreign objects and reduce blockage. It is often used in etching and developing processes for semiconductors and printed circuit boards that require extremely high spray uniformity.
  • Two piece nozzle design which includes nozzle and the body allows quick and accurate installation by hand. No rubber Orings are used, and there is no problem of Oring aging, which can extend the service life.
  • Recommended working pressure: 2.0 kgf/cm²
  • Flowrate tolerance: ± 5% @ 2.0 ± 0.1 kgf/cm²
  • Angle Tolerance: ± 5° @ 2.0 ± 0.1 kgf/cm²
  • Applications:
     Cleaning: Gas, exhaust gas, dust, cleaning device, tank cleaning, etc.
     Cooling: Conveyor belts, gas, tank, machinery, metal, roof, etc.
     Dispersion: Humidifying, Chemicals, firefighting, dust suppression.
LORRIC nozzle

 

 
Spray pattern & Flow distribution
LORRIC nozzle       
LORRIC nozzle

 

Specs

Please place your order according below information.


How to pleace an order for LORRIC nozzles?

  • • You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above.
  • • Please refer to following order example for placing order to LORRIC.
  •   Example :LORRIC nozzle

Select
Unit
  • *
  • *
  • *
  • *
Spray Angle Capacity Code Capacity at Pressure
0.7
kgf/cm²
1.0
kgf/cm²
1.5
kgf/cm²
2.0
kgf/cm²
4.0
kgf/cm²
6.0
kgf/cm²
8.0
kgf/cm²
10.0
kgf/cm²
15.0
kgf/cm²
45° 42 (KDMF) 2.48 2.97 3.64 4.20 5.94 7.27 8.40 9.39 11.50
58° 13 (KD) 3.14 3.75 4.59 5.30 7.50 9.18 10.60 11.85 14.51
45° 65 (KDMF) 3.85 4.60 5.63 6.50 9.19 11.26 13.00 14.53 17.80
Spray Angle Capacity Code Capacity at Pressure
0.07
MPa
0.1
MPa
0.15
MPa
0.2
MPa
0.4
MPa
0.6
MPa
0.8
MPa
1.0
MPa
1.5
MPa
45° 42 (KDMF) 2.51 3.00 3.67 4.24 6.00 7.35 8.48 9.48 11.62
58° 13 (KD) 3.17 3.78 4.63 5.35 7.57 9.27 10.70 11.97 14.66
45° 65 (KDMF) 3.88 4.64 5.68 6.56 9.28 11.37 13.13 14.68 17.98
Spray Angle Capacity Code Capacity at Pressure
0.7
bar
1.0
bar
1.5
bar
2.0
bar
4.0
bar
6.0
bar
8.0
bar
10.0
bar
15.0
bar
45° 42 (KDMF) 2.51 3.00 3.67 4.24 6.00 7.35 8.48 9.48 11.62
58° 13 (KD) 3.17 3.78 4.63 5.35 7.57 9.27 10.70 11.97 14.66
45° 65 (KDMF) 3.88 4.64 5.68 6.56 9.28 11.37 13.13 14.68 17.98
Spray Angle Capacity Code Capacity at Pressure
10
psi
15
psi
20
psi
28
psi
60
psi
90
psi
120
psi
140
psi
200
psi
45° 42 (KDMF) 0.66 0.81 0.93 1.10 1.61 1.97 2.28 2.46 2.94
58° 13 (KD) 0.83 1.02 1.17 1.39 2.03 2.49 2.88 3.11 3.71
45° 65 (KDMF) 1.02 1.25 1.44 1.70 2.49 3.05 3.53 3.81 4.55
  • * Standard Pressure: Column in red.
  • * This product for spray angle 90° and 120° is able to be made to order.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.

 

Material
LORRIC nozzle


 
 
 
Material Guarantees
Metal
We take high quality smithing metal to produce solid and durable nozzles by detail turning.
Plastic
We promise never using recycled materials.
High Quality
All material is purchased from world top providers.
 

 

Product Size
Size (mm) Weight (g)
  A     B     C  
31 40.4 57 25

LORRIC nozzle

 

 


 

+886-978-005-235
[email protected]