HUPE super wear resistance flat fan spray nozzle

Easy installed, Flat fan,UPE
Apply for 
Sand-Blasting Machine
Deburring
Surface Treatment Process

Features
  • The spraying type is fan type, and the spray shape is single line and two sides are tapered (tapered edge), which presents a bell curve shape flow field distribution with weaker ends compared to the middle.
  • Single-piece design, if there is frequent maintenance or replacement requirements, it is recommended to use quick install with multiple pieces nozzles.
  • Recommended working pressure: 3.0 kgf/cm²
    • Flowrate tolerance: ±5%
    • Angle tolerance: ± 5°
        • LORRIC UPE nozzle provides longer lifetime, because we precisely machine it from ultra­high molecular weight polyethylene rod.
        • UPE has high abrasion wear resistance, it’s suitable for liquid with solid particles.

        • LORRIC UPE nozzle has twice to four times the lifetime of no brand nozzle. You don’t need to stop the machine frequently for changing nozzle. LORRIC nozzle can lower your maintenance cost.

        • Although precise UPE product is very difficult to manufacture, LORRIC UPE nozzle still guarantees flow volume and spray angle tolerance within ±5% and ± 5 degree. And the spray pattern is just as good as our other nozzle series so you don’t have to compromise nozzle performance with nozzle lifetime.

        • Applications:

              ● Dispersion: Abrasive(Sand-blasting machine)

 

 
Spray pattern & Flow distribution
       
Specs

Please place your order according below information.


How to pleace an order for LORRIC nozzles?

  • • You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above.
  • • Please refer to following order example for placing order to LORRIC.
  •   Example :

Select
Unit
  • *
  • *
  • *
  • *
Spray Angle Capacity Code Thread Size Capacity at Pressure Capacity at Pressure
1/4" 0.5
kgf/cm²
1.0
kgf/cm²
1.5
kgf/cm²
2.0
kgf/cm²
3.0
kgf/cm²
4.0
kgf/cm²
5.0
kgf/cm²
6.0
kgf/cm²
8.0
kgf/cm²
65° 10 V 1.60 2.26 2.76 3.19 3.91 4.51 5.05 5.53 6.39
65° 12.5 V 2.00 2.82 3.46 3.99 4.89 5.64 6.31 6.91 7.98
Spray Angle Capacity Code Thread Size Capacity at Pressure Capacity at Pressure
1/4" 0.05
MPa
0.1
MPa
0.15
MPa
0.2
MPa
0.3
MPa
0.4
MPa
0.5
MPa
0.6
MPa
0.8
MPa
65° 10 V 1.61 2.28 2.79 3.22 3.95 4.56 5.10 5.58 6.45
65° 12.5 V 2.01 2.85 3.49 4.03 4.94 5.70 6.37 6.98 8.06
Spray Angle Capacity Code Thread Size Capacity at Pressure Capacity at Pressure
1/4" 0.5
bar
1.0
bar
1.5
bar
2.0
bar
3.0
bar
4.0
bar
5.0
bar
6.0
bar
8.0
bar
65° 10 V 1.61 2.28 2.79 3.22 3.95 4.56 5.10 5.58 6.45
65° 12.5 V 2.01 2.85 3.49 4.03 4.94 5.70 6.37 6.98 8.06
Spray Angle Capacity Code Thread Size Capacity at Pressure Capacity at Pressure
1/4" 7
psi
10
psi
20
psi
28
psi
40
psi
60
psi
80
psi
100
psi
110
psi
65° 10 V 0.42 0.50 0.71 0.84 1.00 1.22 1.41 1.58 1.66
65° 12.5 V 0.52 0.63 0.88 1.05 1.25 1.53 1.77 1.98 2.07
  • * Standard Pressure: Column in red.
  • * This product for spray angle 0°, 15°, 25°, 40°, 50°, 100° and 110° is able to be made to order.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.
 
Material

 

 
 
 
Material Guarantees
Metal
We take high quality smithing metal to produce solid and durable nozzles by detail turning.
Plastic
We promise never using recycled materials
High Quality
All material is purchased from world top providers.

 


Product Size
Thread
(BSPT)
 Unit(mm)  Weight(g)
  A     B     C  
1/4"Male
14 15 26 2.5

Installation
Easy installing with 2 simple steps !
Step 1

Drill corresponding female threads on your pipe.

Step 2

For better leakproofness, please use Teflon seal tape on nozzle thread.

Aim the thread of nozzle at the female thread. Tighten the nozzle clockwise.

Finished

Finished.

 

 


 

 
+886-978-005-235