DVEH Cleaning Plastic Flat Fan Spray Nozzle

Easy installed, Plastic, Flat fan
Apply for 

PCB Wet Processing
Display Panel Wet Processing
High Pressure Cleaning
Dust and Powder Washing
Solution Dispersion
General Humidifying
Gravel Washing│Steel Cooling

Download Product Catalogue

Features  
  • The spraying type is fan type, and the spray shape is single line and two sides are tapered (tapered edge), which presents a bell curve shape flow field distribution with weaker ends compared to the middle.
  • Multi-piece structure, easy maintenance, cleaning and replacement, and can save the cost of replacing the nozzle head; filter design, easy maintenance, reduce blocking, and can reduce the damage to the nozzle hole caused by maintenance cleaning, and nozzle unclogging.
  • The special positioning design of the nozzle and base installation ensures that each nozzle can be replaced and returned to the original position.
  • No internal gasket design to avoid possible water leakage or contamination of the gasket.
  • PVDF is resistant to temperature and corrosive chemical solutions. 
  • Flowrate tolerance: ± 5% @ 2.0 ± 0.1 kgf/cm2
  • Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2
  • Jet angle tolerance: ± 
  • Applications:

      ● Cleaning: vehicles, containers, filters, dust, gravel, metals, metal parts,

         machinery, steel plates, various containers etc.

      ● Cooling: gas, tank, machinery, metal, roof etc.

      ● Dispersion: humidifying, chemicals (etching solution, developer, insect

         repellent, etc.), firefighting, dedust, deodorization, etc.

      ● Printed circuit board: etching process, developing process, water washing

        process.

 

 
Spray pattern & Flow distribution
       
Specs

Please place your order according below information.


How to pleace an order for LORRIC nozzles?

  • • You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above.
  • • Please refer to following order example for placing order to LORRIC.
  •   Example :
  •  Below is for ordering DVEH whole set (tip+body), if you require tip only, the order example will be " DVEH 26-50-0 PVDF (T) "

  •                 

Select
Unit
  • *
  • *
  • *
  • *
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.7
kgf/cm²
1.0
kgf/cm²
1.5
kgf/cm²
2.0
kgf/cm²
3.0
kgf/cm²
4.0
kgf/cm²
5.0
kgf/cm²
6.0
kgf/cm²
8.0
kgf/cm²
50° 015 0.89 1.06 1.30 1.50 1.84 2.12 2.37 2.60 3.00
50° 026 1.54 1.84 2.25 2.60 3.18 3.66 4.11 4.50 5.20
80° 012 0.71 0.85 1.04 1.20 1.47 1.70 1.90 2.08 2.40
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.07
MPa
0.1
MPa
0.15
MPa
0.2
MPa
0.3
MPa
0.4
MPa
0.5
MPa
0.6
MPa
0.8
MPa
50° 015 0.90 1.07 1.31 1.51 1.86 2.14 2.39 2.62 3.03
50° 026 1.55 1.86 2.27 2.63 3.22 3.71 4.15 4.55 5.25
80° 012 0.72 0.86 1.05 1.21 1.48 1.71 1.92 2.10 2.42
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
0.7
bar
1.0
bar
1.5
bar
2.0
bar
3.0
bar
4.0
bar
5.0
bar
6.0
bar
8.0
bar
50° 015 0.90 1.07 1.31 1.51 1.86 2.14 2.39 2.62 3.03
50° 026 1.55 1.86 2.27 2.63 3.22 3.71 4.15 4.55 5.25
80° 012 0.72 0.86 1.05 1.21 1.48 1.71 1.92 2.10 2.42
Spray Angle Capacity Code Capacity at Pressure Capacity at Pressure
10
psi
15
psi
20
psi
28
psi
40
psi
60
psi
70
psi
80
psi
90
psi
50° 015 0.23 0.29 0.33 0.39 0.47 0.58 0.62 0.66 0.70
50° 026 0.41 0.50 0.58 0.68 0.81 1.00 1.08 1.15 1.22
80° 012 0.19 0.23 0.27 0.31 0.38 0.46 0.50 0.53 0.56
  • * Standard Pressure: Column in red.
  • * For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.
Material
  • Cap:PP

 

 
 
 
Material Guarantees
Metal
We take high quality smithing metal to produce solid and durable nozzles by detail turning.
Plastic
We promise never using recycled materials
High Quality
All material is purchased from world top providers.

 

Product Size
 Unit(mm)  Weight(g)
  A     B     C  
42.8 19.5 31.5 28.2

 

 


 

+886-978-005-235