DVEH

DVEH Cleaning Plastic Flat Fan Spray Nozzle

Easy installed, Plastic, Flat fan

Apply for
PCB Wet Processing
Display Panel Wet Processing
High Pressure Cleaning
Dust and Powder Washing
Solution Dispersion
General Humidifying
Gravel Washing│Steel Cooling

Why you should choose LORRIC nozzles instead of no brand nozzles？

Download Product Catalogue

Features Specs Material Product Size

Features

The spraying type is fan type, and the spray shape is single line and two sides are tapered (tapered edge), which presents a bell curve shape flow field distribution with weaker ends compared to the middle.

Multi-piece structure, easy maintenance, cleaning and replacement, and can save the cost of replacing the nozzle head; filter design, easy maintenance, reduce blocking, and can reduce the damage to the nozzle hole caused by maintenance cleaning, and nozzle unclogging.

The special positioning design of the nozzle and base installation ensures that each nozzle can be replaced and returned to the original position.
No internal gasket design to avoid possible water leakage or contamination of the gasket.
PVDF is resistant to temperature and corrosive chemical solutions.

Flowrate tolerance: ± 5% @ 2.0 ± 0.1 kgf/cm2

Angle tolerance: ± 5° @ 3.0 ± 0.1 kgf/cm2
Jet angle tolerance: ± 3°

Applications:
● Cleaning: vehicles, containers, filters, dust, gravel, metals, metal parts, machinery, steel plates, various containers etc.
● Cooling: gas, tank, machinery, metal, roof etc.
● Dispersion: humidifying, chemicals (etching solution, developer, insect repellent, etc.), firefighting, dedust, deodorization, etc.
● Printed circuit board: etching process, developing process, water washing process.

Spray pattern & Flow distribution

Specs

Please place your order according below information.

How to pleace an order for LORRIC nozzles?

• You can find the exact Capacity Code according to your requirement of pressure, flow, and spray angle as the capacity & angle chart we provided above. Click to understand how to use the capacity & angle.
• Please refer to the following order example for placing order to LORRIC.
Example :
Below is for ordering DVEH whole set (tip+body), if you require tip only, the order example will be " DVEH 26-50-0 PVDF (T) "

Select
Unit

Spray Angle	Capacity Code	Capacity at Pressure
Spray Angle	Capacity Code	0.7 kgf/cm²	1.0 kgf/cm²	1.5 kgf/cm²	2.0 kgf/cm²	3.0 kgf/cm²	4.0 kgf/cm²	5.0 kgf/cm²	6.0 kgf/cm²	8.0 kgf/cm²
50°	015	0.89	1.06	1.30	1.50	1.84	2.12	2.37	2.60	3.00
50°	026	1.54	1.84	2.25	2.60	3.18	3.66	4.11	4.50	5.20
80°	012	0.71	0.85	1.04	1.20	1.47	1.70	1.90	2.08	2.40

Spray Angle	Capacity Code	Capacity at Pressure
Spray Angle	Capacity Code	0.07 MPa	0.1 MPa	0.15 MPa	0.2 MPa	0.3 MPa	0.4 MPa	0.5 MPa	0.6 MPa	0.8 MPa
50°	015	0.90	1.07	1.31	1.51	1.86	2.14	2.39	2.62	3.03
50°	026	1.55	1.86	2.27	2.63	3.22	3.71	4.15	4.55	5.25
80°	012	0.72	0.86	1.05	1.21	1.48	1.71	1.92	2.10	2.42

Spray Angle	Capacity Code	Capacity at Pressure
Spray Angle	Capacity Code	0.7 bar	1.0 bar	1.5 bar	2.0 bar	3.0 bar	4.0 bar	5.0 bar	6.0 bar	8.0 bar
50°	015	0.90	1.07	1.31	1.51	1.86	2.14	2.39	2.62	3.03
50°	026	1.55	1.86	2.27	2.63	3.22	3.71	4.15	4.55	5.25
80°	012	0.72	0.86	1.05	1.21	1.48	1.71	1.92	2.10	2.42

Spray Angle	Capacity Code	Capacity at Pressure
Spray Angle	Capacity Code	10 psi	15 psi	20 psi	28 psi	40 psi	60 psi	70 psi	80 psi	90 psi
50°	015	0.23	0.29	0.33	0.39	0.47	0.58	0.62	0.66	0.70
50°	026	0.41	0.50	0.58	0.68	0.81	1.00	1.08	1.15	1.22
80°	012	0.19	0.23	0.27	0.31	0.38	0.46	0.50	0.53	0.56

* Standard Pressure: Column in red.
* For mobile friendly, only 3 column with 3 kinds of pressure will be displayed. For more pressure data, please check the chart on PC or laptop.

Material